Triple Monitor Stand

23 02 2010

In the great tradition of the home handyman I decided to have a crack at making my own monitor stand….Armed with local hardware supplies and one old monitor stand I got underway.

I thought for a short while that I was going to pull it off, but after getting to the point of screwing on the monitor, it was clear that I had FAILED.

The side monitors were drooping badly and were touching the desk LOL….so I was left with a useless weird looking sculpture. Hang on maybe I should investigate how much to get some one to weld me up something exactly like this….so off I went with my “prototype” and went door knocking to a few local shops. One place wanted $180 and another over $200, I thought stuff that and was going to give in and buy one of those monitor stands from some one on the net. When I went past one last shop so I dived in and after a short chat deal was done for $50.

I went back home and did a double check on measurements, and took the prototype back to be built.

I must say I was a bit concerned how it was going to turn out as I gave a fairly open brief but I knew it couldn’t go to wrong as I had a full scale model as reference for them. As it turned out it was better than expected.

Now as I connecting up the monitors together I stuffed up with my accurate measuring…by a few cm….I would have been ok if I didn’t go and re-measure and just left them as it was originally LOL. Anyways I managed to work around that and fit the monitor on with a little diy…ugly but good thing is you dont get to see it from the front 🙂 I am going to fancy up the base with some MDF when ever I get around to it but for the mean time it does what it needs to do and that is hold 3 screens and move from desk to sim and back again.

I am planing to make a more intricate version now I have this one up and running…which means I can use it on race nights, while I design and get the fancy one built, and considering the cost of some of the triple monitors stands on the market I may even make a few and see if anyone is interested in buying them. I doubt they will cost $50 bucks but they will be considerably less than 99.99% of the other ones on the market.

The next one will have hinges, a nice base, QR height adjustable stand, and cable guides…etc,  more on that as it happens.

So here it is, not anything too brilliant  but it is perfect for me at the moment.

My “Prototype”

The Beast!



4 responses

13 04 2010

Have you given up on updates?

19 04 2010
abner melo gomes

I wonder if you already have the measures in its cockpit so I can start the construction of the car f1.
Could you send me an email with your project, you can send any file format (PDF, Word, solidworks, cad, etc ….) gomes.abnermelo @
Thank you for the attention

27 08 2010
abner melo gomes

Hello !!!!!!!
A while ago I sent a message to you on the steps that you used to make his cockpit, but you do not had them in the hands momento.Gostaria whether the currently have and could send me? My email is: gomes.abnermelo @
Congratulations again for the work and hope not to have troubled you.
Grateful !!!!!

7 09 2010
Andy Dyer

Firstly Great setup and thanks for setting up this page….it inspires alot of people looking to build a cockpit.
I am planning a similar build next year, If you have any dimensions of your setup I would be grateful if you could send them to me.
I have a new F340 FFB wheel, but I am scared to take it apart to mod it.I am planning on building a Ferrari cockpit. I have ordered a Leo bodnar SLI card to use as a gear shift display and I have projector for the track image.
If you any further advice please drop me a line.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: