bye bye

12 07 2014

Tried to give it away but no takers, been sitting out side covered up for over a year…

So off to tip with it..

Sad sad day for me…

Advertisements




Triple Monitor Stand

23 02 2010

In the great tradition of the home handyman I decided to have a crack at making my own monitor stand….Armed with local hardware supplies and one old monitor stand I got underway.

I thought for a short while that I was going to pull it off, but after getting to the point of screwing on the monitor, it was clear that I had FAILED.

The side monitors were drooping badly and were touching the desk LOL….so I was left with a useless weird looking sculpture. Hang on maybe I should investigate how much to get some one to weld me up something exactly like this….so off I went with my “prototype” and went door knocking to a few local shops. One place wanted $180 and another over $200, I thought stuff that and was going to give in and buy one of those monitor stands from some one on the net. When I went past one last shop so I dived in and after a short chat deal was done for $50.

I went back home and did a double check on measurements, and took the prototype back to be built.

I must say I was a bit concerned how it was going to turn out as I gave a fairly open brief but I knew it couldn’t go to wrong as I had a full scale model as reference for them. As it turned out it was better than expected.

Now as I connecting up the monitors together I stuffed up with my accurate measuring…by a few cm….I would have been ok if I didn’t go and re-measure and just left them as it was originally LOL. Anyways I managed to work around that and fit the monitor on with a little diy…ugly but good thing is you dont get to see it from the front 🙂 I am going to fancy up the base with some MDF when ever I get around to it but for the mean time it does what it needs to do and that is hold 3 screens and move from desk to sim and back again.

I am planing to make a more intricate version now I have this one up and running…which means I can use it on race nights, while I design and get the fancy one built, and considering the cost of some of the triple monitors stands on the market I may even make a few and see if anyone is interested in buying them. I doubt they will cost $50 bucks but they will be considerably less than 99.99% of the other ones on the market.

The next one will have hinges, a nice base, QR height adjustable stand, and cable guides…etc,  more on that as it happens.

So here it is, not anything too brilliant  but it is perfect for me at the moment.

My “Prototype”

The Beast!





Hi all…

5 02 2010

Here is just some update pics, mainly on screens.

I got 3 x 19′ acer for $110.00 so While I wanted 3 screens the same size the price was too good.

I’ll fill in some blanks on work soon.





Happy New Year

31 12 2009

Happy new years to all and I hope your Christmas was enjoyable!

I have done a little bit of work on my little project so here are the latest pics I have of the work taking place.
In these pics I have started the removable headrest protection area, while most will know what this section is, for the others…its a section that sits around the drivers head and continues down to almost in line with the wheel. This section can be  removed by driver to aid in getting in and out of the car.

It is still possible to get in and out with out removing this section, but it is rather a tight fit and requires angling the shoulder to do it. The width is regulated by the FIA but as a practical size when it’s installed it makes the cockpit opening about the width of your hips.

Not finished in those pics but you can see even though it looks rather crude it’s starting to take form.

I also got a chance to drag the rig out side to add and shape the largest top piece of the nose area.

So there you have it… 🙂

More pics soon as I want to try and get it all assembled in January so I can get it painted….hmmmm now to chose a colour. I swore it wasn’t going to be red but now one Schumi has left maybe I can once again support Ferrari…!!! Don’t know now…hmmmmm. Maybe I’ll make my own livery?!?!

While I consider MS to be one of the best drivers ever, he isn’t THE BEST imho… 

Ayrton Senna holds that crown and will for some time.

In saying that I am pumped that Schumi has decided to make a come back..The 2010 F1 season is looking like it will be an absolute cracker! Can’t wait.





More buttons

13 12 2009

A few buttons inside the cockpit.

It’s good now I dont have to use the keyboard as all the buttons I need are either on the wheel or with in easy reach. All the wiring etc is hidden away and out of harms reach. Happy to have that chore out of the way now…

So many wires….It’s not a hard thing to do but it is time consuming.

If there is a coolish day soon I will drag it out side and install the top of the nose and route it, but it’s been so HOT lately. Too hot to move……

One year I really would love to see snow rather than sweating 20 hours a day. 🙂





Update

9 12 2009

Just a few pics of wheel and me and my floral boardies inside the cockpit…:)

I managed to paint the wheel and rebuild it using the hacked usb number pad I posted about last time. Amazing amount of wires inside the wheel, but more amazing (well to me ) is the the lack of wires coming out…got to love usb devices!

Not finished with wheel just yet, got to make up some decals for buttons, get better knobs, and make provision to have wires travel up the steering column, and connect via QR din style of connection. But that sort of stuff doesn’t need to happen right away. Next plan while I have the soldering bug is to add internal buttons for functions like seat adjustment,  starter, exit etc things I wouldn’t use mid race. These will go nicely on dash bulkhead and on the upper armrest areas.

Enough talk here’s some pics.





Headphones

3 12 2009

Mmmmmmmm

  • Bass Vibration
  • LED Flash
  • 5.1 Surround Sound
  • USB Sound Card
  • Noise Canceling

Price? $29 +gst 🙂